REITH LECTURES 2018

 
reith series 2 small.jpg

 

At the beginning of this year I received a phone call from Radio 4 asking me if I would be willing to make prints to illustrate the 2018 Reith Lectures.  Well, I hardly needed to think about it, the answer was "Yes". It sounded interesting and definitely something I wanted to be involved in. The BBC had seen the work I had produced for The Greenbelt Festival and wanted something with a similar feel. Later I found out a little more about the lectures I would be illustrating. The speaker would be historian, Professor Margaret MacMillan, talking on the subject of War and Humanity. I was asked to produce an illustration for each of the five lectures, plus one more to be used as the series image.  These pictures would be used across all the Radio 4 social media platforms, their website, other promotion and invites, as well as the physical backdrop to each lecture itself.

blog 1.jpg

Amazingly, MacMillan planned to talk with just a few notes, so there was no transcript for me to work from to ascertain the details of each talk.  I was given a loose  idea of the subject of each lecture and with guidance from the producers and media team worked through lots of ideas to arrive at the final six designs.

blog 2.jpg

I made each print using the reduction relief printing process. This essentially means that instead of having a separate printing block for each colour, just one is used by cutting away each layer of colour in between prints until all the layers have been printed on top of each other - this means that the printing block gets cut away to nothing and can't be used again, there is no going back to make changes once all the cutting has been done.  

blog3.jpg

I knew that these illustrations would all be shown either digitally on a screen or as commercially printed media, so the original prints themselves would not be the finished work - a new thing for me. After I had completed the first 'Series' image as multiple 2-3 colour reduction prints, it was decided that the colours weren't right.  As I mentioned before, completed prints can not be altered once the layers have been cut away.  Fortunately I'd had the foresight to print each colour separately as well as a completed print and so these separations were each scanned and the colour altered digitally and compiled again just like when a traditional print is made, layer on layer.

blog4.jpg

I made the decision from this point on that for the remaining five images that I would print each one in the same colour separation way, but still use the reduction print technique so that I could be sure that the registration [lining up] of all the layers would be accurate. I printed each layer in black ink as this would be best colour to scan.  Some of the lecture images had as many as 7 layers.  The prints themselves were relatively large to make sure enough detail could accurately be cut into the image as I knew they would be blown up to cinema screen size.  This makes for  a lot of cutting!

It might seem strange to go through this whole time-consuming printing process when actually the final image is compiled on a computer, but the style of illustration the commissioners had seen of mine and wanted to use in their own work was a 'printy' style.  There is a particular quality to relief prints that I love - the lively little marks that are part of the image, showing the artist's hand in the carving of the block and the only way for me to do this authentically was to actually make the prints the old fashioned way!

blog5.jpg

I worked alongside graphic designer, Wilf Whitty, at Ratiotype who helped me by scanning and digitally layering all the finished images, while I cut and printed late into night in order to get the work completed in time for the BBC's deadline.

The lectures take place in London, York, Beirut, Belfast and Ottawa and are broadcast in June and July 2018 on BBC Radio 4 - you can listen again via their website, where you will also find all my illustrations.

March Meet The Maker

 
insta screenshot.jpg

I have decided to join in with Joanne hawker's March Meet The Maker  Instagram challenge. This is what she has to say about it:

'this challenge is to help small businesses to tell the story behind the brand. It also aims to give an insight into the face, process and hard work that goes into creating all of the beautiful products we have to offer.'

The challenge kicked off on Thursday 1st March 2018 and absolutely anyone can join in.  Following a list of 31 prompts for each day of the challenge a daily photo is posted on Instagram tagged #MarchMeetTheMaker. Follow me on Instagram @rubypaperparade

Tidy desk, tidy mind

I have blogged before about the process of a cathartic declutter in my studio and lately I had been feeling like something similar was brewing.  My studio was the visual representation of how my head has been feeling recently – messy and chaotic.

diy.JPG

I am in the hugely fortunate position to use a room in the shared studio of my parent's house; both creatives, they set up the basement studio space when they moved in 14 years ago. 

 

Recently, the scale of my prints and the different areas and way I work has changed.  I felt like my studio and I had grown apart – I wasn’t working efficiently or effectively.  It was time for a change, time to find a new studio.  I admit to feeling a little anxious about not wanting to seem ungrateful when talking to my Folks about the change, but they were brilliant and rather than moving studio they were willing for me to update my part of the studio space in order for it to work better for me and the way I work now.

 

The first change I needed to make was to get a plan chest to store large prints away – giving me more table top space, but also making it easier to keep the prints organised, clean and safe [these were previously taking up a large amount of space on my worktop, being shunted about from surface to surface in order to work around them].  I looked for second-hand chests and couldn’t find anything that would work in my space, so I decided to build one into an alcove.  My husband helped me to construct a framework for drawers to slot into – this was tricky as the alcove walls were far from square or straight!  I then set about constructing drawers and shelves.  I purchased new storage crates that would fit into the shelf unit we had created.  I have to say I am delighted with results.

process 3.jpg

My second issue was work space and a  lack of permanent storage, rather than items stored in plastic boxes, then stowed under my desk.  I acquired upright shelf units and storage boxes which took up less floor space.  The desktop that I had been using was brilliantly ‘multi-use’; office space/printing bench/jewellery making station/mounting and framing surface, I felt it was time to compartmentalise these different areas of my work so I removed the large built-in desk and created a separate office.  I purchased two extendable tables so that I could have as much or as little work surface depending on the requirements of my current project, but also meaning I can have two separate projects on the go [as is often the way].

before.jpg
after.jpg

Lastly, I made the decision to include an armchair into my new work environment – not as you might think for tea breaks [though this is a bonus], but actually a fair amount of my work I make on my knee in the comfort of my sofa at home in the evenings and it struck me that this simple addition to my studio might help me alter my perspective on saving the less 'heavy-weight' work for my ‘down time’ and treat it as equally significant to the running of my business as other areas of my work.  Embracing the work that encourages me to nestle down rather than only valuing the work that means I'm hurtling around feeling like I'm 'getting things done'.   Now that the chair is in and the desk has been taken out from below the window I can now sit in good daylight to work on stitching, making and writing.  I love it!

favourite corners copy.jpg

colour coded

Colour CODED, a group exhibition at the Devon Guild of Craftsmen, 29th Jan - 29th Feb 2016.

blog cc2.jpg

Devon Guild Members, Ruth Broadway, Stuart Low and Angie Parker, are three distinctive makers working in print, glass and weave.

In Colour Coded, each maker has drawn upon skill sharing sessions and group discussion to explore personal responses to the themes of colour and shape.

Open daily, 10am-5.30pm. 01626 832223
Devon Guild of Craftsmen, Riverside Mill, Bovey Tracey, Devon TQ13 9AF

blog cc 1.jpg